100000094

Linear Microcircuit

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 100000094, NSN 5962-00-417-1080

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

100000094
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5962 전자 현미경
국가 재고 번호
5962-00-417-1080
품목 이름 코드
31778
배정 날짜
05/01/1974 (52년 전)

0.220 inches minimum and 0.310 inches maximum body width, 0.140 inches minimum and 0.185 inches maximum body height, -55.0 to 125.0 celsius operating temp range, 400.0 milliwatts maximum power dissipation rating, 0.796 inches maximum body length

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

본체 길이
0.796 inches maximum
몸 폭
0.220 inches minimum and 0.310 inches maximum
몸 고도
0.140 inches minimum and 0.185 inches maximum
최대 힘 Dissipation 등급
400.0 milliwatts
작동 온도 범위
-55.0 to 125.0 celsius
보관 온도 범위
-65.0 to 150.0 celsius
제공되는 기능
hermetically sealed and monolithic and positive outputs
인클로저 재료
ceramic and glass
설정 설치
dual-in-line
입력 회로 패턴
2 input
디자인 기능 및 양
1 regulator, voltage
Case Outline Source And Designator
d-1 mil-m-38510
끝 표면 처리
solder
전압 등급과 유형 특성 당
20.0 volts nominal power source
테스트 데이터 문서
"81349-mil-m-38510 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
끝 유형과 양
14 printed circuit
사양/표준 데이터
81349-mil-m-38510/102 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Source of Supply
S9E - Defense supply center columbus, columbus, oh 43218
Demilitarization
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A458A0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0031778
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8542900000

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061700
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34580
National Motor Freight Class Rating
W - Rating variable
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
elec appliances/instruments noi

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 100000094

What is the FSCG of the NSN 5962-00-417-1080?
The FSCG of the NSN 5962-00-417-1080 is 5962
Does the NSN 5962-00-417-1080 have a Schedule B code assigned?
Yes, the Schedule B code is 8542900000
Does NSN 5962-00-417-1080 require demilitarization?
"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Does NSN 5962-00-417-1080 contain precious materials?
Item does not contain precious metal.
Does NSN 5962-00-417-1080 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5962-00-417-1080 was assigned to the Federal Catalog?
It was assigned 52년 전, on Wed, May 1, 1974

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

S8101-1464424
5305-00-332-5890
Anvil Screw
S8101-1464467
1075-00-554-0994
Mine Sweeping Acoustic Device
S8101-1464468
1075-00-340-6806
Eccentric Mechanism
S8101-1464470
1075-00-507-6344
Eccentric Mechanism
S8101-1493726
5120-00-355-5007
Woven Cable Grip
S8101-149430PT547
5940-00-549-2875
Lug Terminal
S8101-1566522ANDS8101-1566524AN-
1075-00-507-1187
Magnetic Mine Swe Cable Assembly
S8101-1566523
1075-00-024-0216
Magnetic Mine Clamp
S8101-1566525
1075-00-218-0765
Mine Sweeping Float
S8101-1566526PC1T04
1075-00-218-0765
Mine Sweeping Float
S8101-1566526PC5
6240-00-024-0217
Magnetic Mine Clamp
S8101-1723578
1075-01-368-2482
Mine Sweeping Acoustic Device
S8101-1723597
1075-00-928-6623
Elevating Fin Liner
S8101-1723626
3940-00-722-8995
Tackle Block
S8101-1723662
3940-00-722-8994
Tackle Block