DMS 89123B

Electrical Receptacle Connector

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. DMS 89123B, NSN 5935-01-091-0158

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

DMS 89123B
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5935 전기 연결관
국가 재고 번호
5935-01-091-0158
품목 이름 코드
15093
배정 날짜
02/29/1980 (46년 전)

다른 전기 커넥터 또는 인쇄 배선 기판과 결합할 때 편의를 위해 케이블, 도관, 동축 라인, 코드 또는 배선의 끝에 부착되도록 구성된 전기 접점이 있는 전기 부속품으로 격벽, 체이스, 패널, 인쇄 배선판 등에 장착하도록 설계되지 않았습니다. 제외 : 잭, 전화; 잭, 팁; 플러그, 전화; 플러그 팁; 인서트, 전기 커넥터; 커넥터 본체(수정된 대로); 그리고 소켓, 플러그 접속식, 전자 부품. 또한 참조하십시오 lead assembly, electrical; 와이어링 하니스(수정된 대로); 및 케이블 어셈블리(수정된 대로). 인서트가 없는 항목에 대해서는 쉘, 전기 커넥터를 참조하십시오.

right angle type body style, 1.580 inches nominal overall length, 0.652 inches maximum body height, vibration resistant environmental protection, 0.501 inches nominal overall width

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍
right angle type
전체 길이
1.580 inches nominal
전체 너비
0.501 inches nominal
몸 고도
0.652 inches maximum
환경 보호
vibration resistant
Mating 끝 양
1
접촉 위치 배열 작풍
2 rows of contacts non-inserted board single mating end
연락처 Removability
nonremovable single mating end single contact grouping
터미널 위치
side single mating end single contact grouping
접촉 물자
copper alloy single mating end single contact grouping
접촉 표면 처리
gold and nickel single mating end single contact grouping
삽입 물자
glass and plastic polyamide (nylon) single mating end
끝 유형
pin single mating end single contact grouping
포함 접촉 양
26 single mating end single contact grouping
관련 문의 유형
flat pin single mating end single contact grouping
귀중한 자료 및 위치
contact surfaces gold
귀중한 소재와 무게
0.026 gold grains, troy
귀중한 재료
gold

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Source of Supply
SMS - Defense logistics agency, enterprise business systems
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A039B0
Precious Metals Indicator
G - Item contains gold.
Pseudo Item Name Code
0015093
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8538907080

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061680
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34570
National Motor Freight Class Rating
W - Rating variable
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
elec wiring plugs etc

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. DMS 89123B

What is the FSCG of the NSN 5935-01-091-0158?
The FSCG of the NSN 5935-01-091-0158 is 5935
Does the NSN 5935-01-091-0158 have a Schedule B code assigned?
Yes, the Schedule B code is 8538907080
Does NSN 5935-01-091-0158 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5935-01-091-0158 contain precious materials?
Item contains gold.
Does NSN 5935-01-091-0158 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5935-01-091-0158 was assigned to the Federal Catalog?
It was assigned 46년 전, on Fri, Feb 29, 1980

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

4730-010-564
5340-01-725-5915
Mending Plate
4730-010-567
5340-01-725-6008
Mending Plate
4730-010-568
5340-01-725-7897
Mending Plate
4730-010-570
5340-01-725-6091
Mounting Bracket
4730-010-573
5340-01-725-5661
Mending Plate
4730-010-577
5340-01-725-5893
Mending Plate
4730-010-578
5340-01-725-5904
Mending Plate
4730-010-580
5340-01-725-9254
Mounting Bracket
4730-010-582
5340-01-725-5920
Mending Plate
4730-010-584
5365-01-725-9234
Sleeve Spacer
4730-010-585
5365-01-725-5533
Sleeve Bushing
4730-010-586
5340-01-725-5182
Mending Plate
4730-010-587
5340-01-725-9223
Mending Plate
4730-010-590
5340-01-725-7856
Mounting Bracket
4730-010-592
5340-01-725-9212
Mending Plate