MS27473E14B5P

Electrical Plug Connector

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. MS27473E14B5P, NSN 5935-01-045-4792

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

MS27473E14B5P
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5935 전기 연결관
국가 재고 번호
5935-01-045-4792
품목 이름 코드
01938
배정 날짜
08/02/1977 (49년 전)

다른 전기 커넥터 또는 인쇄 배선 기판과 결합할 때 편의를 위해 케이블, 도관, 동축 라인, 코드 또는 배선의 끝에 부착되도록 구성된 전기 접점이 있는 전기 부속품으로 격벽, 체이스, 패널, 인쇄 배선판 등에 장착하도록 설계되지 않았습니다. 제외 : 잭, 전화; 잭, 팁; 플러그, 전화; 플러그 팁; 인서트, 전기 커넥터; 커넥터 본체(수정된 대로); 그리고 소켓, 플러그 접속식, 전자 부품. 또한 참조하십시오 lead assembly, electrical; 와이어링 하니스(수정된 대로); 및 케이블 어셈블리(수정된 대로). 인서트가 없는 항목에 대해서는 쉘, 전기 커넥터를 참조하십시오.

1 mating end quantity, 1.026 inches maximum overall length, 1.156 inches maximum overall diameter, moisture resistant and vibration resistant and salt water resistant environmental protection, straight shape, internal coupling body style

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍
straight shape, internal coupling
전체 길이
1.026 inches maximum
전체 직경
1.156 inches maximum
환경 보호
moisture resistant and vibration resistant and salt water resistant
Mating 끝 양
1
접촉 위치 배열 작풍
14-5 single mating end
연락처 Removability
removable single mating end single contact grouping
편광 방법
key, multiple key groove
Deg에 위치 삽입
0.0 and 100.0 and 128.0 and 228.0 and 265.0
포탄 유형
solid
연결관 잠그는 방법
bayonet latch
운영하는 임시 직원 등급
-65.0 celsius minimum and 175.0 celsius maximum
터미널 위치
back single mating end single contact grouping
접촉 물자
copper alloy single mating end single contact grouping
접촉 표면 처리
gold single mating end single contact grouping
접촉 표면 처리 문서 및 분류
mil-g-45204 mil spec single treatment response single mating end single contact grouping
끝 유형
crimp single mating end single contact grouping
포탄 물자
aluminum alloy
포탄 표면 처리
cadmium
포탄 표면 처리 문서와 분류
qq-p-416 fed spec single treatment response
포함 접촉 양
5 single mating end single contact grouping
관련 문의 유형
round pin single mating end single contact grouping
귀중한 자료 및 위치
contact surfaces gold
귀중한 소재와 무게
0.025 gold grains, troy
귀중한 재료
gold
테스트 데이터 문서
"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
사양/표준 데이터
96906-ms27473 government standard

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A039B0
Precious Metals Indicator
G - Item contains gold.
Pseudo Item Name Code
0001938
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8536695050

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061680
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34570
National Motor Freight Class Rating
W - Rating variable
Water Commodity
658 - Electrical appliances, small
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
elec wiring plugs etc

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. MS27473E14B5P

What is the FSCG of the NSN 5935-01-045-4792?
The FSCG of the NSN 5935-01-045-4792 is 5935
Does the NSN 5935-01-045-4792 have a Schedule B code assigned?
Yes, the Schedule B code is 8536695050
Does NSN 5935-01-045-4792 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5935-01-045-4792 contain precious materials?
Item contains gold.
Does NSN 5935-01-045-4792 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5935-01-045-4792 was assigned to the Federal Catalog?
It was assigned 49년 전, on Tue, Aug 2, 1977

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

3P/800
2520-01-066-4755
Ring
3P-93LD 5-16
4210-00-391-5623
Head Plate
3P-93RD 5-16
4210-00-391-5624
Head Plate
3P-COMPAQ-SRV
7035-01-494-1156
Automatic Data Processing Server
3P-COMPAQ-SRV-1
7035-01-494-1156
Automatic Data Processing Server
3P-COMPAQ-SRV-2
7035-01-494-1156
Automatic Data Processing Server
3P-DELL-SRV
7035-01-494-1161
Automatic Data Processing Server
3P-DELL-SRV-1
7035-01-494-1161
Automatic Data Processing Server
3P-DELL-SRV-2
7035-01-494-1161
Automatic Data Processing Server
3P0007
6105-01-068-5972
Motor G Base
3P0009
2910-01-066-4752
Insulator
3P00100-101
1560-00-076-1233
Aircraft Fairing
3P00100-102
1560-00-076-1234
Aircraft Fairing
3P00100-111
1560-00-076-1209
Aircraft Fairing
3P00100-112
1560-00-076-6613
Aircraft Fairing