314-18018-01
Current Transformer
이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 314-18018-01, NSN 5950-01-131-2363
자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.
단 하나 두드려진 감기 (autotransformer 유형), 또는 자석 분야의 수단으로 회로에 있는 유도적인 반응 및/또는 이동 전기 에너지를 품기 위하여 디자인된 2개 또는 더 감기가 있는 품목. 작업의 전체 범위가 20 킬레츠 (kilocycles) 이상임을 디자인했습니다. 최소 값은 오디오 주파수 범위로 확장 할 수 있습니다 (20 킬러츠). 그것은 완전한 축전기, 코일, 저항기 및 조정가능한 튜닝 핵심을 포함할지도 모릅니다. 2개의 활동적인 맨끝이 코일, 고주파를 보는 품목을 위해. 각 다른 것에 대한 존중으로 이동할 수 있는 권선이 있는 유형을 포함합니다. 제외 : 변압기, discriminator.
not established reliability indicator, 0.530 inches maximum body length, 0.910 inches maximum body outside diameter, 20.0 kilohertz nominal single component frequency rating, single phase to single phase single component input-output phase relationship
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- Reliability 지시자
- not established
- 빈도 등급
- 20.0 kilohertz nominal single component
- 입력-출력 위상 관계(Input-Output Phase Relationship)
- single phase to single phase single component
- 본체 길이
- 0.530 inches maximum
- 본체 외경
- 0.910 inches maximum
- 최대 작동 온도
- 130.0 celsius
- 관련 상품
- fully inclosed
- 설치 시설 수량
- 1 single group
- 설치 방법
- threaded hole single group
- 감기 기능 그리고 양
- 2 primary and 1 secondary single component
- 공칭 나사 크기
- 0.112 inches single group
- 감기 작동 현재
- 12.0 amperes ac maximum single component 1st primary
- 감기 작동 현재
- 120.0 milliamperes ac maximum single component single secondary
- 나사 시리즈 지정자
- unc single group
- 끝 유형과 양
- 6 pin
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- 1 - Full descriptive item identification
- Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A058B0
- A - Item does not contain precious metal.
- 0000738
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TX
- 063420
- Z
- 35355
- W - Rating variable
- 595 - Transformer, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- transformers,noi,or transformer par
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 314-18018-01
What is the FSCG of the NSN 5950-01-131-2363?
Does NSN 5950-01-131-2363 require demilitarization?
Does NSN 5950-01-131-2363 contain precious materials?
Does NSN 5950-01-131-2363 contain hazardous materials?
When the NSN 5950-01-131-2363 was assigned to the Federal Catalog?
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.