5950-01-086-4635
Radio Frequency Coil
Find complete technical information, availability, and procurement data for NSN 5950-01-086-4635 All details are based on official government and industry records to support accurate and compliant procurement.
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5950 코일 및 변압기
국가 재고 번호
5950-01-086-4635
품목 이름 코드
06338
배정 날짜
11/29/1979 (46년 전)
머리가 없고 일반적으로 원통형 모양의 항목으로, 천공된 구멍이 있거나 없는 직선적이고 매끄럽고 단단한 몸체를 가지고 있습니다. 외경이 길이와 같거나 작습니다. 길이는 12인치(304mm)를 초과해서는 안 됩니다. 길이가 12인치(304mm)를 초과하는 품목의 경우; 막대, 똑바로, 머리가 없는 보십시오. 토크 및/또는 추력의 정렬 또는 전달에 사용되며, 다른 항목의 해당 구멍에 적합합니다. 핀, 직선, 나사산도 참조하십시오.
470.00 microhenries nominal single component single winding inductance rating, 0.880 inches minimum and 0.900 inches maximum body length, s0lid single component core construction, solid single component coil form type, not established reliability indicator
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- Reliability 지시자
- not established
- Inductance 등급
- 470.00 microhenries nominal single component single winding
- 코일 형태 유형
- solid single component
- 핵심 건설
- s0lid single component
- 본체 길이
- 0.880 inches minimum and 0.900 inches maximum
- 전체 직경
- 0.290 inches minimum and 0.310 inches maximum
- 최대 작동 온도
- 125.0 celsius
- 관련 상품
- fully inclosed
- 설치 방법
- terminal single group
- 등급 방법
- electrical single component single winding
- 제공되는 기능
- tinned wire leads
- 감기 지휘자 크기 (mm)
- 0.02846 inches american wire gage single component single winding
- 감기 작동 현재
- 170.0 milliamperes dc maximum single component single winding
- DC 저항 등급(옴)
- 17.000 single component single winding
- 품질 관리
- 60 minimum single component single winding
- 테스트 데이터 문서
- "81349-mil-c-15305 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 끝 유형과 양
- 2 wire lead
- 사양/표준 데이터
- 96906-ms21380 government standard
Replaces National Stock Numbers
Below is a list of NSNs that have been officially replaced by the NSN 5950-01-086-4635
| NSN | 이름 | 날짜 |
|---|---|---|
| 5950-00-951-0450 | No Name Available | 06/01/2007 |
관련 부품 및 사양
이 NSN에는 특정 운영 요구에 맞게 설계된 다양한 관련 부품이 포함되어 있습니다. 아래의 각 항목을 검토하여 올바른 적용 및 교체를 위한 심층적인 사양, 기능 세부 정보 및 지침을 찾으십시오.
| 부품 번호 | 이름 |
|---|---|
| 6020771 | Radio Frequency Coil |
| G-302605J4700 | Radio Frequency Coil |
| LT4K384 | Radio Frequency Coil |
| MS21380-33 | Radio Frequency Coil |
| RFCL470 | Radio Frequency Coil |
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A058B0
- U - Precious metal content is unknown
- 0006338
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8504500000
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TX
- 061980
- X
- 34700
- P - 77.5
- 595 - Transformer, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- field coils generator/motor
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 5950-01-086-4635
What is the FSCG of the NSN 5950-01-086-4635?
The FSCG of the NSN 5950-01-086-4635 is 5950
Does the NSN 5950-01-086-4635 have a Schedule B code assigned?
Yes, the Schedule B code is 8504500000
Does NSN 5950-01-086-4635 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5950-01-086-4635 contain precious materials?
Precious metal content is unknown
Does NSN 5950-01-086-4635 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5950-01-086-4635 was assigned to the Federal Catalog?
It was assigned 46년 전, on Thu, Nov 29, 1979
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.
FREE
