20015131

Power Transformer

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 20015131, NSN 5950-00-995-3945

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

20015131
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5950 코일 및 변압기
국가 재고 번호
5950-00-995-3945
품목 이름 코드
32496
배정 날짜
01/01/1963 (63년 전)

55.0 hertz minimum and 420.0 hertz maximum single component frequency rating, not established reliability indicator, 1.188 inches nominal single mounting facility single center group center to center distance between mounting facilities parallel to length, single phase to single phase single component input-output phase relationship, 1.188 inches nominal single mounting facility single center group center to center distance between mounting facilities parallel to width

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

Reliability 지시자
not established
Center To Center Distance Between Mounting Facilities Parallel To Length(장착 시설 사이의 중심 간 거리: 길이에 평행)
1.188 inches nominal single mounting facility single center group
Center To Center Distance Between Mounting Facilities Parallel To Width
1.188 inches nominal single mounting facility single center group
빈도 등급
55.0 hertz minimum and 420.0 hertz maximum single component
입력-출력 위상 관계(Input-Output Phase Relationship)
single phase to single phase single component
본체 길이
1.625 inches nominal
몸 폭
1.625 inches nominal
몸 고도
2.375 inches nominal
관련 상품
hermetically sealed
설치 시설 수량
4 single group
설치 방법
threaded stud single group
감기 기능 그리고 양
1 primary and 1 secondary single component
인치당 실 수량
32 single group
공칭 나사 크기
0.138 inches single group
감기 작동 현재
25.0 milliamperes ac maximum single component single secondary
감기 운영 전압
16.00 ac volts nominal single component single secondary
감기 운영 전압
115.00 ac volts nominal single component single primary
나사 시리즈 지정자
unc single group
끝 유형과 양
4 tab, solder lug

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Source of Supply
S9E - Defense supply center columbus, columbus, oh 43218
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A058B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0032496
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
063420
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
35355
National Motor Freight Class Rating
W - Rating variable
Less than Car Load Rating
P - 77.5
Water Commodity
595 - Transformer, (machinery and parts),(less than 35 feet)
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
transformers,noi,or transformer par

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 20015131

What is the FSCG of the NSN 5950-00-995-3945?
The FSCG of the NSN 5950-00-995-3945 is 5950
Does NSN 5950-00-995-3945 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5950-00-995-3945 contain precious materials?
Precious metal content is unknown
Does NSN 5950-00-995-3945 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5950-00-995-3945 was assigned to the Federal Catalog?
It was assigned 63년 전, on Tue, Jan 1, 1963

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

8354157G2
4140-01-556-0323
Centrifugal Fan Assembly
835416
5340-01-171-8055
Bail Handle
835416-00
5340-01-171-8055
Bail Handle
8354227
4820-01-615-2700
Ball Valve
8354234
4730-00-187-0488
Boss Reducer
835427T04
5330-01-723-6354
Gasket
835427T05
5330-01-664-9095
Gasket
83543
5342-00-602-6412
Filter Clip
835433
8465-01-606-7232
Pouch Field Pack Flap
8354344
5330-00-826-9741
Gasket
8354367
5120-00-998-7663
Impeller Puller
8354370P21
6645-00-618-9496
Time Totalizing Meter
8354380
4730-00-090-9142
Bushing
8354381
2510-00-621-1413
Lock Ring Shoe
8354382
5306-01-015-0643
Machine Bolt