APL1-19-23R
Circuit Breaker
이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. APL1-19-23R, NSN 5925-00-007-7461
자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.
"이 장치는 현재가 장치가 설정되는 경우 미리 정의 된 값에서 다를 때 설치되는 회로를 자동으로 개폐하는 것보다 다른 장치를 의미합니다. 5월에는 수동 조작에 대한 규정이 포함되어 있습니다. 접촉의 적어도 1 세트는 행동 성분 (s)로 시리즈에 있어야 합니다. 반도체 및 수동적인 장치의 조합은 접촉의 리듬에서 사용될지도 모릅니다. 행동 (tripping) 요소와 접촉이 시리즈에 있지 않은 자동 작동 항목에 대해, 릴레이를 참조하십시오 (변경). 수동으로 작동하고 자동적으로 작동되는 품목을 위해 그러나 활성 성분 및 접촉은 시리즈에서 아닙니다, 릴레이 스위치를 보십시오. Excludes: 회로 차단기 상자와 magneto “breaker” 집합. 또한 스위치를 참조 (변경); 및 컨트롤러."
0.735 inches minimum and 0.765 inches maximum body width, +0.1177 to 0.1214 inches thread pitch diameters, 2.485 inches minimum and 2.515 inches maximum body length, 1.925 inches minimum and 1.955 inches maximum center to center distance between terminals parallel to length, single pole type body style
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- 나사 피치 직경
- +0.1177 to 0.1214 inches
- 몸 작풍
- single pole type
- 본체 길이
- 2.485 inches minimum and 2.515 inches maximum
- 몸 폭
- 0.735 inches minimum and 0.765 inches maximum
- Center To Center Distance Between Terminals Parallel To Length(터미널 간 중심 거리, 길이에 평행)
- 1.925 inches minimum and 1.955 inches maximum
- 거치 기능의 중심 사이 거리 몸 길이에 평행한
- 2.047 inches minimum and 2.077 inches maximum
- 스위치 접촉 배열
- single pole, double throw
- Fragility 요인
- moderately rugged
- Boss 고도
- 0.125 inches minimum and 0.155 inches maximum
- 끝 거리에 설치 표면
- 2.775 inches minimum and 2.955 inches maximum
- 폴란드 양
- 1
- Arc 냉각 방법
- magnetic blowout
- 설치 시설 유형과 양
- 2 threaded hole
- 저장 유형
- general purpose warehouse
- 특수 취급 기능
- magnetic
- 인치당 실 수량
- 32
- 폴란드 당 최대 지속적인 짐 현재 등급
- 5.0 amperes ac and 5.0 amperes dc single location
- 전압 유형과 볼트에 있는 폴란드 당 등급
- 250.0 ac and 50.0 dc single location
- 최대 Interrupting 수용량 현재 유형 및 Amps에 있는 폴란드 당 등급
- 1000.0 ac and 2000.0 dc single location
- 회로 보호 제품정보
- overcurrent single location
- 여행 방출 방법
- magnetic single location
- 여행 방출 특성
- time delay single location
- 퍼센트에 있는 폴란드 당 지속적인 현재 등급의 궁극적인 여행
- 125.0 single location
- 재설정 방법
- manual
- 주요 접촉 Tripping 기계장치 유형
- trip free
- 수동 액추에이터 유형과 양
- 1 toggle
- Actuator 기능
- trip-reset
- Actuator 위치 지정
- at pole one
- 보조 스위치 기능 및 양
- 1 alarm
- 내부 Trip Release 설정
- series trip single location
- 공칭 나사 크기
- 0.138 inches
- 위치 및 위치 지정 전환
- internal at pole one
- 정격 연속 전류당 Trip Delay Time In Seconds
- 3.000 minimum at 200 pct and 10.000 maximum at 200 pct single location
- 어떤 Designed를 위한 보호 유형
- shock resistant and vibration resistant and moisture resistant and salt spray proof
- 스위치 맨끝 제품정보
- tab, solder lug
- Amps에 있는 스위치 현재 등급 그리고 유형
- 5.0 ac and 1.0 dc
- 볼트에 있는 전압 등급 그리고 유형 전환
- 115.0 ac and 50.0 dc
- 포장되지 않은 단위 무게
- 0.312 pounds nominal
- Hertz에 있는 빈도
- 60.0 single location
- 재료
- plastic case
- 테스트 데이터 문서
- 05869-711570 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
- 나사 시리즈 지정자
- unc
- 끝 유형과 양
- 2 threaded stud
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Source of Supply
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- S9E - Defense supply center columbus, columbus, oh 43218
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A030A0
- A - Item does not contain precious metal.
- 0000136
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8536200040
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- TX
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. APL1-19-23R
What is the FSCG of the NSN 5925-00-007-7461?
Does the NSN 5925-00-007-7461 have a Schedule B code assigned?
Does NSN 5925-00-007-7461 require demilitarization?
Does NSN 5925-00-007-7461 contain precious materials?
Does NSN 5925-00-007-7461 contain hazardous materials?
When the NSN 5925-00-007-7461 was assigned to the Federal Catalog?
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.