AP14-1071-2

Circuit Breaker

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. AP14-1071-2, NSN 5925-00-007-7206

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

AP14-1071-2
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5925 회로 차단기
국가 재고 번호
5925-00-007-7206
품목 이름 코드
00136
배정 날짜
07/12/1972 (54년 전)

"이 장치는 현재가 장치가 설정되는 경우 미리 정의 된 값에서 다를 때 설치되는 회로를 자동으로 개폐하는 것보다 다른 장치를 의미합니다. 5월에는 수동 조작에 대한 규정이 포함되어 있습니다. 접촉의 적어도 1 세트는 행동 성분 (s)로 시리즈에 있어야 합니다. 반도체 및 수동적인 장치의 조합은 접촉의 리듬에서 사용될지도 모릅니다. 행동 (tripping) 요소와 접촉이 시리즈에 있지 않은 자동 작동 항목에 대해, 릴레이를 참조하십시오 (변경). 수동으로 작동하고 자동적으로 작동되는 품목을 위해 그러나 활성 성분 및 접촉은 시리즈에서 아닙니다, 릴레이 스위치를 보십시오. Excludes: 회로 차단기 상자와 magneto “breaker” 집합. 또한 스위치를 참조 (변경); 및 컨트롤러."

Body Length: Up to 1.5 inches, Continuous Load Current Rating Per Pole: Up to 600 milliamperes ac first location, Bushing Length: Up to 0.38 inches

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

내부 Trip Release 설정
Relay trip second location
내부 Trip Release 설정
Series trip first location
Actuator 위치 지정
Between pole one and two
Actuator 기능
Trip-reset
Manual Actuator Type and Quantity
1 toggle
주요 접촉 Tripping 기계장치 유형
Trip free
재설정 방법
Manual
퍼센트에 있는 폴란드 당 지속적인 현재 등급의 궁극적인 여행
125 all locations
여행 방출 특성
Time delay all locations
여행 방출 방법
Magnetic-hydraulic all locations
회로 보호 제품정보
Overcurrent all locations
Interrupting Capacity Current Type and Rating Per Pole In Amps
Up to 500 dc second location
Interrupting Capacity Current Type and Rating Per Pole In Amps
Up to 300 ac first location
Operating Voltage Type and Rating Per Pole In Volts
50 dc second location
Operating Voltage Type and Rating Per Pole In Volts
250 ac first location
Continuous Load Current Rating Per Pole
Up to 600 milliamperes dc second location
Continuous Load Current Rating Per Pole
Up to 600 milliamperes ac first location
인치당 실 수량
32
폴란드 양
2
Mounting Facility Type and Quantity
1 threaded bushing with panel seal
끝 거리에 설치 표면
Up to 1.780 inches
Center To Center Distance Between Terminals Parallel To Width
0.625 inches
몸 폭
Up to 1.25 inches
케이스 물자
Metal
Center To Center Distance Between Terminals Parallel To Length(터미널 간 중심 거리, 길이에 평행)
0.875 inches
본체 길이
Up to 1.5 inches
투관 길이
Up to 0.38 inches
몸 작풍
Multipole-single actuator type
공칭 나사 크기
0.375 inches
정격 연속 전류당 Trip Delay Time In Seconds
0.055 to 0.95 at 200 pct all locations
어떤 Designed를 위한 보호 유형
Hermetically sealed
Hertz에 있는 빈도
60 all locations
나사 시리즈 지정자
Unef
Terminal Type and Quantity
4 wire hook and 2 tab, solder lug

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
4 - Partial descriptive item identification (type 1 concept)
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A030A0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000136
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8536200040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
063160
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
35205
National Motor Freight Class Rating
W - Rating variable
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
switch boxes/elec enclosures

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. AP14-1071-2

What is the FSCG of the NSN 5925-00-007-7206?
The FSCG of the NSN 5925-00-007-7206 is 5925
Does the NSN 5925-00-007-7206 have a Schedule B code assigned?
Yes, the Schedule B code is 8536200040
Does NSN 5925-00-007-7206 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5925-00-007-7206 contain precious materials?
Precious metal content is unknown
Does NSN 5925-00-007-7206 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5925-00-007-7206 was assigned to the Federal Catalog?
It was assigned 54년 전, on Wed, Jul 12, 1972
How long is nsn 5925-00-007-7206?
Up to 1.5 inches

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

091024574
5330-00-465-5773
Gasket
0910251
5310-00-010-3088
Hexagon Plain Nut
0910251-8
5310-00-010-3088
Hexagon Plain Nut
0910255
5310-00-010-3346
Flat Washer
0910255-9
5310-00-010-3346
Flat Washer
0910256
4730-00-287-1689
Tube Tee
09102575
4030-01-329-1838
S Chain Hook
0910259
5315-00-010-3399
Cotter Pin
0910259-1
5315-00-010-3399
Cotter Pin
0910261
4730-00-172-0025
Lubrication Fitting
0910267
5310-00-011-4492
Hexagon Plain Nut
0910267-4
5310-00-011-4492
Hexagon Plain Nut
0910271
5305-00-958-5245
Machine Screw
0910271-6
5305-00-958-5245
Machine Screw
09102G019A051A
5365-01-347-3944
Plate Spacer