1. 시작 /
  2. 목록 /
  3. 커패시터 /
  4. 5910-01-468-2617 /
  5. CFR13ALE106JP

CFR13ALE106JP

Capacitor,fixed,metallized,paper

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. CFR13ALE106JP, NSN 5910-01-468-2617

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

CFR13ALE106JP
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5910 커패시터
국가 재고 번호
5910-01-468-2617
품목 이름 코드
31959
배정 날짜
10/04/1999 (26년 전)

분해할 수 있는 두 개 이상의 물리적으로 연결되거나 관련된 전기 및/또는 전자 부품의 그룹입니다. 어셈블리의 각 구성 요소는 자체 항목 이름에 따라 작동할 수 있어야 합니다. 단일 인쇄 회로 기판 또는 단자 기판으로 구성되며, 그 위에 커패시터, 인덕터, 저항기 등과 같은 별도로 제조된 전자 부품이 장착됩니다. 여기에는 인쇄된 전자 부품도 포함될 수 있습니다. 항목은 일반적으로 횡단구성요소의 일부이며 보다 명확한 항목 이름을 지정할 수 없습니다. 완전한 개별 전기/전자 기능이 있는 항목의 경우 ampliifier(수정된 대로); 전원 공급 장치; 또는 등등. 완전한 개별 전기/전자 기능을 갖지 않는 항목의 경우, 증폭기 하위 어셈블리와 같은 적용 가능한 하위 어셈블리 이름을 참조하십시오. 전원 공급 장치 하위 어셈블리; 또는 등등. 단일 인쇄 배선 기판 이외의 곳에 장착된 전기/전자 부품 조립에 대해서는 전자 부품 조립을 참조하십시오. 제외 사항 : 인쇄 회로 기판

1.418 inches minimum and 1.668 inches maximum body diameter, established reliability indicator, 2.188 inches minimum and 2.312 inches maximum body length, 0.100 reliability failure rate level in percent, w/o mtg facilities, axial terminals body style

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍
w/o mtg facilities, axial terminals
Reliability 지시자
established
Percent에 있는 신뢰성 실패 비율 수준
0.100
본체 직경
1.418 inches minimum and 1.668 inches maximum
본체 길이
2.188 inches minimum and 2.312 inches maximum
Schematic 다이어그램 Designator
no common or grounded electrode(s)
최종 품목 식별
ssm-xmitter g
섹션당 Capacitance Value
10.000 microfarads single section
공급 능력
-55.0 celsius minimum and 105.0 celsius maximum
Nonderated 연속 전압 등급 및 섹션당 유형
400.0 dc single section
포용력 단면도 당 범위
-5.00 to 5.00 percent single section
끝 표면 처리
solder
재료
plastic case
끝 유형과 양
2 uninsulated wire lead
사양/표준 데이터
81349-mil-prf-55514/9 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
4 - Partial descriptive item identification (type 1 concept)
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0031959
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. CFR13ALE106JP

What is the FSCG of the NSN 5910-01-468-2617?
The FSCG of the NSN 5910-01-468-2617 is 5910
Does the NSN 5910-01-468-2617 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-01-468-2617 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-468-2617 contain precious materials?
Item does not contain precious metal.
Does NSN 5910-01-468-2617 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-468-2617 was assigned to the Federal Catalog?
It was assigned 26년 전, on Mon, Oct 4, 1999

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

348080C3
2590-00-150-1507
Horn Button
3480810
4710-01-331-6737
Metal Tube Assembly
3480810-1
4710-01-331-6737
Metal Tube Assembly
3480811
4730-01-330-3573
Fluid Flow Restrictor
3480811-3
4730-01-330-3573
Fluid Flow Restrictor
348082-10
1680-01-416-3934
Pedal Pad
348082-8
1680-01-416-3939
Pedal Pad
348082-9
1680-01-416-3940
Pedal Pad
348083-1
5340-01-283-3674
Dust and Moistur Protective Plug
3480830
4710-01-331-6734
Metal Tube Assembly
3480830-1
4710-01-331-6734
Metal Tube Assembly
3480831
4710-01-331-3658
Metal Tube Assembly
3480831-1
4710-01-331-3658
Metal Tube Assembly
3480832
4710-01-331-0759
Metal Tube Assembly
3480832-1
4710-01-331-0759
Metal Tube Assembly