MA28151J

Ceramic Dielectr Fixed Capacitor

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. MA28151J, NSN 5910-01-252-9690

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

MA28151J
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5910 커패시터
국가 재고 번호
5910-01-252-9690
품목 이름 코드
00007
배정 날짜
04/10/1987 (39년 전)

용량 값이 조정되거나 다양 할 수없는 커패시터는 세라믹 유전체가 있습니다. 단 하나 단위일 수 있습니다, 또는 분리될 수 없는 2개 이상 조정 단위로 이루어져 있습니다.

chip type body style, 0.0100 reliability failure rate level in percent, 0.100 inches nominal body diameter, 0.015 inches nominal terminal length, established reliability indicator

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍
chip type
Reliability 지시자
established
Percent에 있는 신뢰성 실패 비율 수준
0.0100
끝 길이
0.015 inches nominal
본체 직경
0.100 inches nominal
본체 길이
0.090 inches minimum and 0.145 inches maximum
몸 폭
0.110 inches nominal
몸 고도
0.030 inches minimum and 0.102 inches maximum
Schematic 다이어그램 Designator
no common or grounded electrode(s)
단면도 양
1
절연 저항 최대 작동 온도에
100000.0 megohms
섹션당 Capacitance Value
150.000 picofarads single section
공급 능력
-55.0 celsius minimum and 125.0 celsius maximum
섭씨 deg 당 Ppm에 있는 단면도 당 용량의 임시 직원 계수
90.0 single section
Nonderated 연속 전압 등급 및 섹션당 유형
300.0 dc single section
섭씨 deg 당 Ppm에 있는 단면도 당 임시 직원 계수의 포용력
-20.0 to 20.0 single section
포용력 단면도 당 범위
-1.00 to 1.00 percent single section
절연 저항 At Reference Temp
1000000.0 megohms
Dissipation Factor At Reference Temp In 퍼센트
0.050
참고 임시 직원에 품질 인자
2500.000
끝 표면 처리
solder
재료
ceramic or glass case
테스트 데이터 문서
"81349-mil-c-55681 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
끝 유형과 양
2 bonding pad
사양/표준 데이터
81349-mil-c-55681/4 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0000007
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. MA28151J

What is the FSCG of the NSN 5910-01-252-9690?
The FSCG of the NSN 5910-01-252-9690 is 5910
Does the NSN 5910-01-252-9690 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-01-252-9690 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-252-9690 contain precious materials?
Item does not contain precious metal.
Does NSN 5910-01-252-9690 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-252-9690 was assigned to the Federal Catalog?
It was assigned 39년 전, on Fri, Apr 10, 1987

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

NASM16491
5310-00-045-1816
Shouldered Washer
NASM16491/3-1
5325-01-623-3885
Metallic Grommet
NASM16491 TY 3 CL 3 SZ 0
5325-00-641-1278
Metallic Grommet
NASM16491 TY 8 CL 4B SZ 11
5325-00-264-1224
Metallic Grommet
NASM16491 TY III CL3 SZ5
5325-00-202-2053
Metallic Grommet
NASM16491 TY11 CL3 SI12
5325-00-231-6605
Metallic Grommet
NASM16491 TY2, CL1, SI, 1J
5325-00-641-0407
Metallic Grommet
NASM16491TY
5325-00-641-0403
Metallic Grommet
NASM16491TY11 CL3 SI2
5325-00-231-6605
Metallic Grommet
NASM16491TY3CL3SI3
5325-00-641-0295
Metallic Grommet
NASM16491TYIIICL3SZ2
5325-01-522-0685
Metallic Grommet
NASM16491TYPE3CL2SIZE5
5325-01-506-7568
Metallic Grommet
NASM1651
5305-01-341-4696
Socket Head Cap Screw
NASM16535
5320-00-060-5385
Tubular Rivet
NASM16535-135N
5320-01-047-6335
Tubular Rivet