184-7999-040

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍

w/o mtg facilities, axial terminals

Reliability 지시자

not established

끝 길이

1.500 inches minimum

본체 직경

0.390 inches nominal

본체 길이

0.312 inches nominal

Schematic 다이어그램 Designator

electrode(s) grounded to case, w/gnd terminal

양극 유형

solid

전기 편광

polarized

제공되는 기능

hermetically sealed case

섹션당 Capacitance Value

140.000 microfarads single section

공급 능력

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated 연속 전압 등급 및 섹션당 유형

40.0 dc single section

포용력 단면도 당 범위

-10.00 to 10.00 percent single section

전기줄 물자

tantalum

Dissipation Factor At Reference Temp In 퍼센트

6.0000

Equivalent Series Resistance at 기준 온도(Ohms)

2.00

기준 온도에서 DC 누설

32.000 microamperes

끝 표면 처리

solder

케이스 절연제 물자

plastic

테스트 데이터 문서

13499-184-7999-040 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

끝 유형과 양

2 uninsulated wire lead

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification

1 - Full descriptive item identification

Source of Supply

SMS - Defense logistics agency, enterprise business systems

Demilitarization

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Criticality

X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Federal Item Identification Guide

A010B0

Precious Metals Indicator

U - Precious metal content is unknown

Pseudo Item Name Code

0000008

Hazardous Material Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Schedule B Code

8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity

TX

National Motor Freight Classification Item Number

061400

National Motor Freight Classification Sub-Item Number

X

Uniform Freight Classification Item Number

34450

National Motor Freight Class Rating

P - 77.5

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

Type of Cargo

Z - No special type of cargo code applicable

Special Hand

9 - Other or no special handling required (sh)

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Commodity

HZ -

National Motor Freight Description

condensers/parts noi/capacitors

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 184-7999-040

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

6110-01-318-5021

4730-01-581-1913

5961-00-532-2824

4730-00-283-6421

5315-01-258-7543

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.