P722037513

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍

w/o mtg facilities, terminals on opposite surfaces

Reliability 지시자

not established

끝 길이

1.120 inches minimum

본체 길이

0.800 inches nominal

몸 폭

0.310 inches nominal

몸 고도

0.800 inches nominal

Schematic 다이어그램 Designator

no common or grounded electrode(s)

절연 저항 최대 작동 온도에

33.0 megohm-microfarads

섹션당 Capacitance Value

10000.000 picofarads single section

공급 능력

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated 연속 전압 등급 및 섹션당 유형

300.0 dc single section

Capacitance의 임시 직원 계수 Ppm 당 Deg 섭씨에 있는 단면도 당 범위

+0.0 to 70.0 single section

포용력 단면도 당 범위

-2.00 to 2.00 percent single section

절연 저항 At Reference Temp

1000.0 megohm-microfarads

Dissipation Factor At Reference Temp In 퍼센트

0.0010

끝 표면 처리

solder

재료

plastic case

테스트 데이터 문서

"81349-mil-c-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

끝 유형과 양

2 uninsulated wire lead

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification

4 - Partial descriptive item identification (type 1 concept)

Demilitarization

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Criticality

X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Federal Item Identification Guide

A010B0

Precious Metals Indicator

U - Precious metal content is unknown

Pseudo Item Name Code

0000005

Hazardous Material Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Schedule B Code

8532290020

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity

XX

National Motor Freight Classification Item Number

061400

National Motor Freight Classification Sub-Item Number

X

Uniform Freight Classification Item Number

34450

National Motor Freight Class Rating

P - 77.5

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Type of Cargo

Z - No special type of cargo code applicable

Special Hand

9 - Other or no special handling required (sh)

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Commodity

HZ -

National Motor Freight Description

condensers/parts noi/capacitors

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. P722037513

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

5306-01-608-7390

5930-01-540-9463

6140-01-476-8945

8010-01-265-9144

5940-01-454-5226

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.