1015607

Mica Dielectric Fixed Capacitor

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 1015607, NSN 5910-00-101-5607

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

1015607
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5910 커패시터
국가 재고 번호
5910-00-101-5607
품목 이름 코드
00005
배정 날짜
01/01/1961 (65년 전)

용량 값이 조정되거나 다양 할 수없는 커패시터, 천연 시트 mica 또는 재구성 된 플레스틱 된 mica가 절연재로 시트로 형성 될 수 있습니다. 단 하나 단위일 수 있습니다, 또는 분리될 수 없는 2개 이상 조정 단위로 이루어져 있습니다.

1.120 inches minimum terminal length, 0.190 inches nominal body width, 0.730 inches nominal body length, w/o mtg facilities, terminals on opposite surfaces body style, not established reliability indicator

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

몸 작풍
w/o mtg facilities, terminals on opposite surfaces
Reliability 지시자
not established
끝 길이
1.120 inches minimum
본체 길이
0.730 inches nominal
몸 폭
0.190 inches nominal
몸 고도
0.440 inches nominal
끝 직경
0.032 inches nominal
Schematic 다이어그램 Designator
no common or grounded electrode(s)
섹션당 Capacitance Value
120.000 picofarads single section
공급 능력
-55.0 celsius minimum and 85.0 celsius maximum
Nonderated 연속 전압 등급 및 섹션당 유형
500.0 dc single section
Capacitance의 임시 직원 계수 Ppm 당 Deg 섭씨에 있는 단면도 당 범위
-200.0 to 200.0 single section
포용력 단면도 당 범위
-2.00 to 2.00 percent single section
끝 표면 처리
solder
재료
plastic case
테스트 데이터 문서
"81349-mil-c-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
끝 유형과 양
2 uninsulated wire lead
사양/표준 데이터
81349-mil-c-5/2a government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000005
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290020

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Less than Car Load Rating
P - 77.5
Water Commodity
658 - Electrical appliances, small
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 1015607

What is the FSCG of the NSN 5910-00-101-5607?
The FSCG of the NSN 5910-00-101-5607 is 5910
Does the NSN 5910-00-101-5607 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290020
Does NSN 5910-00-101-5607 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-00-101-5607 contain precious materials?
Precious metal content is unknown
Does NSN 5910-00-101-5607 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-00-101-5607 was assigned to the Federal Catalog?
It was assigned 65년 전, on Sun, Jan 1, 1961

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

6S3457
5315-01-300-6859
Headed Straight Pin
6S3459
3120-01-250-0880
Self-Aligning Plain Bearing
6S3461
5310-01-250-0891
Flat Washer
6S3463
5360-01-302-7233
Compression Helical Spring
6S3465
3120-01-250-0881
Self-Aligning Plain Bearing
6S3466
5315-01-250-0845
Headless Straight Pin
6S3472
5315-01-250-0846
Headless Straight Pin
6S3473
5315-01-300-6860
Headed Straight Pin
6S3474
5315-01-250-0847
Headless Straight Pin
6S3479
5330-01-110-9265
Plain Encased Seal
6S3483
2815-01-250-2135
Internal Combustion Engin Piston
6S3490
3020-01-302-7259
Bevel Gear
6S3495
3120-01-047-0840
Bearing
6S35109AD25C2
1680-01-057-5174
Support Bracket Strip
6S3607
5342-01-133-4405
Roller