RDM15E750FIC

Mica Dielectric Fixed Capacitor

このページでは、部品番号に関する完全で検証済みの情報を提供します RDM15E750FIC, NSN 5910-01-059-6532

詳細な技術仕様、製品属性、状態分類、リアルタイムの在庫状況を確認できます。すべてのデータは公式記録に基づいており、防衛、航空宇宙、産業調達の業界標準を満たしています。部品監査の実行、コンプライアンスの検証、発注書の準備のいずれの場合でも、この部品リストは正確かつ効率的な調達をサポートします。

RDM15E750FIC
連邦供給グループ
Electrical and Electronic Equipment Components
連邦供給分類
5910 コンデンサ
国内在庫番号
5910-01-059-6532
商品名コード
00005
割り当て日
04/15/1978 (48年前)

抵抗値を調整または変更できない抵抗器。抵抗要素は、絶縁された形状に巻かれた、または自立するように構築された高抵抗ワイヤ(またはリボン)で構成されています。アイテムは、自己インダクタンスを誘導する固有の特性を持っている必要があります。電流の流れに対する反対は、抵抗線の固有の特性であり、抵抗器の熱放散によって現れます。Exclut sサプレッサー、イグニッション干渉。抵抗器(1)、固定、巻線、非誘導性も参照してください。

established reliability indicator, 0.400 inches minimum and 0.450 inches maximum body length, 1.000 inches minimum terminal length, 0.0100 reliability failure rate level in percent, w/o mtg facilities terminal(s) on one surface body style

特性

以下は、技術データ、材料組成、コンプライアンス情報など、この部品の公式仕様と性能の詳細です。

ボディ スタイル
w/o mtg facilities terminal(s) on one surface
信頼性の表示器
established
パーセントの信頼性の失敗率のレベル
0.0100
末端の長さ
1.000 inches minimum
体長
0.400 inches minimum and 0.450 inches maximum
ボディ幅
0.360 inches maximum
ボディ高さ
0.095 inches minimum and 0.180 inches maximum
ターミナル間の中心への間隔 平行への長さ
0.225 inches nominal
末端の直径
0.025 inches nominal
Schematic の図表の指定器
no common or grounded electrode(s)
最高の作動の臨時雇用者の絶縁材の抵抗
10000.0 megohms
セクションごとの容量の価値
75.000 picofarads single section
非処理された作動の臨時雇用者
-55.0 celsius minimum and 125.0 celsius maximum
セクションごとのNonderated連続的な電圧評価そしてタイプ
500.0 dc single section
セクションあたりの静電容量範囲の温度係数 (ppm/°C)
-20.0 to 100.0 single section
セクションごとの許容範囲
-1.00 to 1.00 percent single section
絶縁材の抵抗 参照の臨時雇用者
100000.0 megohms
割合の参照の臨時雇用者のdissipationの要因
0.0002
ターミナル 表面処理
solder
材料
plastic case
テストデータドキュメント
"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
末端のタイプおよび量
2 uninsulated wire lead
仕様/標準データ
81349-mil-c-39001/5 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
4 - Partial descriptive item identification (type 1 concept)
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000005
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290020

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

よくある質問(FAQ)

設置手順、動作条件、お手入れ方法、業界規制、一般的な問題に関する洞察を得ることができます。以下のFAQは、次の重要な情報を提供します。 RDM15E750FIC

What is the FSCG of the NSN 5910-01-059-6532?
The FSCG of the NSN 5910-01-059-6532 is 5910
Does the NSN 5910-01-059-6532 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290020
Does NSN 5910-01-059-6532 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-059-6532 contain precious materials?
Precious metal content is unknown
Does NSN 5910-01-059-6532 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-059-6532 was assigned to the Federal Catalog?
It was assigned 48年前, on Sat, Apr 15, 1978

消耗品が必要ですか?

必需品が不足していますか?業務を順調に進めるために設計された高品質消耗品の広範なカタログをご覧ください。

Electrical Wires

あなたにおすすめ

カタログから、その他の需要の高いNSNコンポーネントのセレクションをご覧ください。これらの注目の部品は、防衛、航空宇宙、産業分野の調達チームによって頻繁に調達されます。

価格と在庫状況

フォームに記入して、NSNスペシャリストから正確な価格、リードタイム、在庫の詳細を入手してください。

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

人気パーツ

お客様の需要と調達頻度に基づいて選択された、最も高性能な部品をご覧ください。すべてのリストには、最新の仕様、在庫状況、状態が含まれています。

17-501F00M00
5995-01-355-2286
E Special Purpose Cable Assembly
17-502-2
5940-00-082-4974
Feedthru Terminal
17-502-2-033
5940-00-082-4974
Feedthru Terminal
17-50358-6
1720-00-909-0956
Flange Weldment
17-50359-1
1720-00-830-9030
Outlet Flange
17-50392-SV-142-A
4930-00-835-5094
Wormwheel
17-503F01M01R00
6150-01-502-5361
E Special Purpose Cable Assembly
17-503F01M01R02
5935-01-390-9666
Electrical Connector Backshell
17-503F02M01R00
5995-01-225-5054
E Special Purpose Cable Assembly
17-503F02M01R01
6150-01-502-7111
E Special Purpose Cable Assembly
17-503F03M01R02
6150-01-502-5362
E Special Purpose Cable Assembly
17-504
2530-00-190-4389
Center Arm and Late
17-504-1
5940-00-913-8090
Feedthru Terminal
17-504-4
5940-00-082-4970
Feedthru Terminal
17-50412-6
1720-00-118-6189
Top Weldment Cover