199416

Reactor

דף זה מספק מידע מלא ומאומת עבור מספר חלק 199416, NSN 5950-00-645-3556

תמצא מפרטים טכניים מפורטים, תכונות מוצר, סיווג מצב וזמינות מלאי בזמן אמת. כל הנתונים מבוססים על רשומות רשמיות ועומדים בתקני התעשייה לביטחון, תעופה וחלל ומיקור תעשייתי. בין אם אתה מבצע ביקורת חלקים, מאמת תאימות או מכין הזמנת רכש, רישום חלקים זה תומך ברכש מדויק ויעיל.

199416
קבוצת אספקה פדרלית
Electrical and Electronic Equipment Components
סיווג אספקה פדרלי
5950 Coils ו- Transformers
מספר מלאי לאומי
5950-00-645-3556
שם פריט קוד
00724
תאריך ההקצאה
01/01/1963 (לפני 63 שנים)

0.938 inches nominal single mounting facility single center group center to center distance between mounting facilities parallel to width, 50.00 henry nominal single component 2nd winding inductance rating, 0.938 inches nominal single mounting facility single center group center to center distance between mounting facilities parallel to length, not established reliability indicator, fixed inductance type

מאפיינים

להלן המפרט הרשמי ופרטי הביצועים עבור חלק זה, כולל נתונים טכניים, הרכב חומרים ומידע על תאימות.

המונחים:
not established
מרכז מרחק בין מתקני הרהר במקביל אורך
0.938 inches nominal single mounting facility single center group
מרכז מרחק בין מתקני הרהר במקביל ל-Width
0.938 inches nominal single mounting facility single center group
סוג אינדוקטיבי
fixed
Inductance
50.00 henry nominal single component 2nd winding
Inductance
200.00 henry nominal single component 1st winding
אורך גוף
2.010 inches nominal
קוטר חיצוני של הגוף
1.665 inches nominal
Winding Quantity
2 single component
המונחים Type
fully inclosed
הרהורים Quantity
4 single group
שיטת הרים
threaded stud single group
שיטת הדירוג
electrical single component all winding
גודל הברגה נומינלי
0.112 inches single group
Winding Current
4.0 milliamperes dc maximum single component 1st winding
Winding Current
8.0 milliamperes dc maximum single component 2nd winding
דירוג התנגדות DC באוהם
1250.000 single component 2nd winding
דירוג התנגדות DC באוהם
5000.000 single component 1st winding
סמן סדרת חוט
unc single group
טרמינל Type & Quantity
5 solder stud

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A058B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000724
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8504900020

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
063498
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34420
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
voice coil/dynamic loudspeaker

שאלות נפוצות

קבל תובנות לגבי נהלי התקנה, תנאי הפעלה, הוראות טיפול, תקנות בתעשייה ובעיות נפוצות. שאלות נפוצות להלן מספקות מידע עיקרי עבור 199416

What is the FSCG of the NSN 5950-00-645-3556?
The FSCG of the NSN 5950-00-645-3556 is 5950
Does the NSN 5950-00-645-3556 have a Schedule B code assigned?
Yes, the Schedule B code is 8504900020
Does NSN 5950-00-645-3556 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5950-00-645-3556 contain precious materials?
Precious metal content is unknown
Does NSN 5950-00-645-3556 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5950-00-645-3556 was assigned to the Federal Catalog?
It was assigned לפני 63 שנים, on Tue, Jan 1, 1963

זקוק לחומרים מתכלים?

האספקה החיונית אוזלת? עיינו בקטלוג הנרחב שלנו של חומרים מתכלים באיכות גבוהה שנועדו לשמור על הפעילות שלכם במסלול הנכון.

Electrical Wires

מומלץ עבורך

גלה מבחר של רכיבי NSN אחרים בעלי ביקוש גבוה מהקטלוג שלנו. חלקים מוצגים אלה מגיעים לעתים קרובות על ידי צוותי רכש במגזרי ההגנה, התעופה והחלל והתעשייה.

מחיר וזמינות

מלא את הטופס כדי לקבל תמחור מדויק, זמן אספקה ופרטי מלאי ממומחי ה-NSN שלנו:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

חלקים פופולריים

עיין בחלקים בעלי הביצועים הטובים ביותר שלנו, שנבחרו על סמך דרישת הלקוחות ותדירות הרכש. כל הרישומים כוללים מפרט עדכני, זמינות ומצב:

SLB189-4-7
5305-01-349-7654
Close Tolerance Screw
SLB189-4-8
5305-01-348-4887
Close Tolerance Screw
SLB189-4-8A
5305-01-349-7653
Close Tolerance Screw
SLB2
5975-00-015-6012
Electrical Entrance Elbow
SLB2000-SHPIN
5315-01-676-3502
Headless Grooved Pin
SLB212-3-10
5305-01-328-9226
Close Tolerance Screw
SLB212-3-3
5305-01-341-6591
Close Tolerance Screw
SLB212-3-4A
5305-01-414-5402
Close Tolerance Screw
SLB212-3-5
5305-01-328-9227
Close Tolerance Screw
SLB212-3-6
5306-01-346-9360
Machine Bolt
SLB212-3-6A
5305-01-329-9743
Close Tolerance Screw
SLB212-3-7
5305-01-351-6320
Close Tolerance Screw
SLB212-3-8
5306-01-346-9361
Machine Bolt
SLB212-3-8A
5305-01-425-5120
Close Tolerance Screw
SLB212-4-10
5305-01-348-7101
Close Tolerance Screw