3SR2C3

Rotary Switch

Esta página proporciona información completa y verificada para el número de pieza 3SR2C3, NSN 5930-00-258-5483

Encontrará especificaciones técnicas detalladas, atributos del producto, clasificación de condición y disponibilidad de existencias en tiempo real. Todos los datos se basan en registros oficiales y cumplen con los estándares de la industria para la defensa, la industria aeroespacial y el abastecimiento industrial. Ya sea que esté realizando una auditoría de piezas, validando el cumplimiento o preparando una orden de compra, esta lista de piezas respalda una adquisición precisa y eficiente.

3SR2C3
Grupo de suministro federal
Electrical and Electronic Equipment Components
Clasificación Federal de Suministros
5930 Interruptores
Número de stock nacional
5930-00-258-5483
Código de nombre del artículo
02134
Fecha de asignación
01/01/1963 (hace 63 años)

4.375 inches nominal overall width, 1.562 inches nominal single actuator shaft length, 5.187 inches nominal overall length, 3.688 inches nominal overall height, 0.375 inches nominal single actuator shaft diameter

Características

A continuación se muestran las especificaciones oficiales y los detalles de rendimiento de esta pieza, incluidos los datos técnicos, la composición del material y la información de cumplimiento.

Longitud total
5.187 inches nominal
Altura total
3.688 inches nominal
Anchura total
4.375 inches nominal
Diámetro del eje
0.375 inches nominal single actuator
Longitud del eje
1.562 inches nominal single actuator
Diámetro del orificio de montaje sin rosca
0.314 inches minimum and 0.317 inches maximum single mounting facility
Cantidad de sección individual
4
Distancia horizontal más larga entre los centros de montaje
3.812 inches nominal single mounting facility
Diseño básico de contacto de interruptor
nonpile-up nonsymmetrical
Método de montaje
base and unthreaded hole single mounting facility
Tensión nominal de contacto en voltios
250.0 dc at sea level
Tensión nominal de contacto en voltios
500.0 ac at sea level
Patrón de instalación de montaje
two position in-line single mounting facility
Posición de indexación del actuador del interruptor cantidad
4 single actuator
Tipo de eje
round w/through hole single actuator
Tipo de terminal
tab w/screw
Acción de conmutación de contactos
breaks before makes each section front
Incremento de posicionamiento del actuador del interruptor
90.0 degrees single actuator
Clasificación de corriente de carga de contacto
30.0 amperes resistive load ac at sea level
Clasificación de corriente de carga de contacto
30.0 amperes resistive load dc at sea level
Designador de estilo
tap, circuit selector
Documento de datos de prueba
"81349-mil-s-15291 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Especificación/Datos estándar
81349-mil-s-15291/7 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A052B0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0002134
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8536509025

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
061360
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34430
National Motor Freight Class Rating
M - 85.0
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
coils/yokes focus/deflection tv

Preguntas Frecuentes

Obtenga información sobre los procedimientos de instalación, las condiciones de funcionamiento, las instrucciones de cuidado, las regulaciones de la industria y los problemas comunes. Las preguntas frecuentes a continuación proporcionan información clave para 3SR2C3

What is the FSCG of the NSN 5930-00-258-5483?
The FSCG of the NSN 5930-00-258-5483 is 5930
Does the NSN 5930-00-258-5483 have a Schedule B code assigned?
Yes, the Schedule B code is 8536509025
Does NSN 5930-00-258-5483 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5930-00-258-5483 contain precious materials?
Precious metal content is unknown
Does NSN 5930-00-258-5483 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5930-00-258-5483 was assigned to the Federal Catalog?
It was assigned hace 63 años, on Tue, Jan 1, 1963

¿Necesita consumibles?

¿Te estás quedando sin suministros esenciales? Explore nuestro extenso catálogo de consumibles de alta calidad diseñados para mantener sus operaciones en marcha.

Electrical Wires

Recomendado para ti

Descubra una selección de otros componentes NSN de alta demanda de nuestro catálogo. Estas piezas destacadas son obtenidas con frecuencia por equipos de adquisiciones en los sectores de defensa, aeroespacial e industrial.

Precio & Disponibilidad

Complete el formulario para obtener precios precisos, plazos de entrega y detalles de existencias de nuestros especialistas en NSN:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

Piezas populares

Explore nuestras piezas de mayor rendimiento, seleccionadas en función de la demanda del cliente y la frecuencia de adquisición. Todos los listados incluyen especificaciones, disponibilidad y condición actualizadas:

AUTMD20251AUTO
7643-01-704-4940
Topographic Geospatial Products
AUTMD20252AUTO
7643-01-704-4937
Topographic Geospatial Products
AUTMD20253AUTO
7643-01-704-4938
Topographic Geospatial Products
AUTMD20254AUTO
7643-01-704-4945
Topographic Geospatial Products
AUTMD20261AUTO
7643-01-704-4941
Topographic Geospatial Products
AUTMD20262AUTO
7643-01-704-4944
Topographic Geospatial Products
AUTMD20263AUTO
7643-01-704-4943
Topographic Geospatial Products
AUTMD20264AUTO
7643-01-704-4942
Topographic Geospatial Products
AUTMD21241AUTO
7643-01-704-4948
Topographic Geospatial Products
AUTMD21242AUTO
7643-01-704-4947
Topographic Geospatial Products
AUTMD21243AUTO
7643-01-704-4950
Topographic Geospatial Products
AUTMD21244AUTO
7643-01-704-4946
Topographic Geospatial Products
AUTMD21252AUTO
7643-01-704-4949
Topographic Geospatial Products
AUTMD21253AUTO
7643-01-704-4951
Topographic Geospatial Products
AUTMD21254AUTO
7643-01-704-4954
Topographic Geospatial Products