711570-23
Circuit Breaker
Diese Seite enthält vollständige und verifizierte Informationen zur Teilenummer 711570-23, NSN 5925-00-007-7461
Hier finden Sie detaillierte technische Spezifikationen, Produktattribute, Zustandsklassifizierung und Lagerverfügbarkeit in Echtzeit. Alle Daten basieren auf offiziellen Aufzeichnungen und entsprechen den Industriestandards für Verteidigung, Luft- und Raumfahrt und industrielle Beschaffung. Ganz gleich, ob Sie ein Teileaudit durchführen, die Compliance validieren oder eine Bestellung vorbereiten, diese Teileliste unterstützt eine genaue und effiziente Beschaffung.
"ein Gerät mit anderen Mitteln als Sicherungen zum automatischen Öffnen der Schaltung, in der sie installiert ist, wenn der Strom von dem vorgegebenen Wert variiert, für den das Gerät eingestellt wird. Kann Bestimmungen für den manuellen Betrieb enthalten. Mindestens ein Kontaktsatz muss mit dem oder den Betätigungselementen in Reihe sein. Anstelle von Kontakten kann eine Kombination von Halbleiter- und passiven Bauelementen verwendet werden. Bei automatisch betriebenen Gegenständen, bei denen das Betätigungselement und die Kontakte nicht in Serie sind, siehe Relais (modifiziert). Bei Gegenständen, die sowohl manuell als auch automatisch betrieben werden, aber die Betätigungselemente und der Kontakt sind nicht in Reihe, siehe Relaisschalter. Ausschließt:Schalterkasten und magneto "brecher" Baugruppen. Siehe auch Schalter (wie modifiziert); und Controller."
+0.1177 to 0.1214 inches thread pitch diameters, 0.735 inches minimum and 0.765 inches maximum body width, 2.485 inches minimum and 2.515 inches maximum body length, 1.925 inches minimum and 1.955 inches maximum center to center distance between terminals parallel to length, single pole type body style
Charaktereigenschaften
Nachfolgend finden Sie die offiziellen Spezifikationen und Leistungsdetails für dieses Teil, einschließlich technischer Daten, Materialzusammensetzung und Konformitätsinformationen.
- Gewindesteigungsdurchmesser
- +0.1177 to 0.1214 inches
- Karosserieform
- single pole type
- Korpuslänge
- 2.485 inches minimum and 2.515 inches maximum
- Korpusbreite
- 0.735 inches minimum and 0.765 inches maximum
- Abstand von Mitte zu Mitte zwischen Klemmen parallel zur Länge
- 1.925 inches minimum and 1.955 inches maximum
- Abstand zwischen den Mittellinien der Montageeinrichtungen parallel zur Körperlänge
- 2.047 inches minimum and 2.077 inches maximum
- Anordnung der Schaltkontakte
- single pole, double throw
- Fragilitätsfaktor
- moderately rugged
- Höhe der Nabe
- 0.125 inches minimum and 0.155 inches maximum
- Abstand zwischen Montagefläche und Klemme
- 2.775 inches minimum and 2.955 inches maximum
- Pole Menge
- 1
- Methode des Lichtbogenabschreckens
- magnetic blowout
- Art und Menge der Montageeinrichtung
- 2 threaded hole
- Speichertypus
- general purpose warehouse
- Spezielles Handhabungsmerkmal
- magnetic
- Gewindeanzahl pro Zoll
- 32
- Maximaler Dauerlaststrom pro Pol
- 5.0 amperes ac and 5.0 amperes dc single location
- Betriebsspannungstyp und Nennspannung pro Pol in Volt
- 250.0 ac and 50.0 dc single location
- Maximale Unterbrechungskapazität Stromart und Nennleistung pro Pol in Ampere
- 1000.0 ac and 2000.0 dc single location
- Art des Schaltungsschutzes
- overcurrent single location
- Methode der Auslösefreigabe
- magnetic single location
- Auslöse-Charakteristik
- time delay single location
- Ultimative Auslösebewertung des Dauerstroms pro Pol in Prozent
- 125.0 single location
- Reset-Methode
- manual
- Typ des Hauptkontaktauslösemechanismus
- trip free
- Typ und Menge des manuellen Antriebs
- 1 toggle
- Aktuator-Funktion
- trip-reset
- Positionsbezeichnung des Stellantriebs
- at pole one
- Funktion und Menge des Hilfsschalters
- 1 alarm
- Interne Konfiguration der Reisefreigabe
- series trip single location
- Nenngewindegröße
- 0.138 inches
- Schalterstandort und Positionsbezeichnung
- internal at pole one
- Auslöseverzögerungszeit in Sekunden pro Nenndauerstrom
- 3.000 minimum at 200 pct and 10.000 maximum at 200 pct single location
- Schutzart des Gehäuses, für die entwickelt wurde
- shock resistant and vibration resistant and moisture resistant and salt spray proof
- Typ der Schaltklemme
- tab, solder lug
- Schalten Sie den Nennstrom um und geben Sie die Ampere ein
- 5.0 ac and 1.0 dc
- Nennspannung des Schalters und Typ in Volt
- 115.0 ac and 50.0 dc
- Gewicht der unverpackten Einheit
- 0.312 pounds nominal
- Frequenz in Hertz
- 60.0 single location
- Material
- plastic case
- Testdatendokument
- 05869-711570 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
- Gewindeserienbezeichnung
- unc
- Anschlusstyp und Menge
- 2 threaded stud
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Source of Supply
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- S9E - Defense supply center columbus, columbus, oh 43218
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A030A0
- A - Item does not contain precious metal.
- 0000136
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8536200040
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- TX
Häufig gestellte Fragen
Erhalten Sie Einblicke in Installationsverfahren, Betriebsbedingungen, Pflegeanweisungen, Branchenvorschriften und häufige Probleme. Die folgenden FAQs enthalten wichtige Informationen für 711570-23
What is the FSCG of the NSN 5925-00-007-7461?
Does the NSN 5925-00-007-7461 have a Schedule B code assigned?
Does NSN 5925-00-007-7461 require demilitarization?
Does NSN 5925-00-007-7461 contain precious materials?
Does NSN 5925-00-007-7461 contain hazardous materials?
When the NSN 5925-00-007-7461 was assigned to the Federal Catalog?
Benötigen Sie Verbrauchsmaterialien?
Gehen die lebenswichtigen Vorräte zur Neige? Entdecken Sie unseren umfangreichen Katalog an hochwertigen Verbrauchsmaterialien, die entwickelt wurden, um Ihren Betrieb auf Kurs zu halten.
Für Sie empfohlen
Entdecken Sie eine Auswahl weiterer stark nachgefragter NSN-Komponenten aus unserem Katalog. Diese vorgestellten Teile werden häufig von Beschaffungsteams in den Bereichen Verteidigung, Luft- und Raumfahrt und Industrie beschafft.
Preis & Verfügbarkeit
Füllen Sie das Formular aus, um genaue Preise, Vorlaufzeiten und Lagerbestandsdetails von unseren NSN-Spezialisten zu erhalten: