C2-71

Sensitive Switch

توفر هذه الصفحة معلومات كاملة وموثقة لرقم الجزء C2-71, NSN 5930-01-050-8433

ستجد المواصفات الفنية التفصيلية وسمات المنتج وتصنيف الحالة وتوافر المخزون في الوقت الفعلي. تستند جميع البيانات إلى السجلات الرسمية وتفي بمعايير الصناعة للدفاع والفضاء والمصادر الصناعية. سواء كنت تقوم بإجراء تدقيق لقطع الغيار أو التحقق من صحة الامتثال أو إعداد أمر شراء، فإن قائمة الأجزاء هذه تدعم عملية شراء دقيقة وفعالة.

C2-71
مجموعة الإمداد الفيدرالية
Electrical and Electronic Equipment Components
تصنيف الإمدادات الفيدرالية
5930 Switches
رقم السهم الوطني
5930-01-050-8433
اسم العنصر الكود
00399
تاريخ التعيين
11/15/1977 (منذ 48 سنة)

1.660 inches nominal body length, 0.490 inches minimum and 0.550 inches maximum body width, hole mounted body style, 1.300 inches nominal body height, dustproof and explosion proof hazardous locations/environmental protection

الخصائص

فيما يلي المواصفات الرسمية وتفاصيل الأداء لهذا الجزء ، بما في ذلك البيانات الفنية وتكوين المواد ومعلومات الامتثال.

نمط الجسم
hole mounted
المواقع الخطرة/الحماية البيئية
dustproof and explosion proof
طول الجسم
1.660 inches nominal
الجسد
0.490 inches minimum and 0.550 inches maximum
الجسم
1.300 inches nominal
Unthreaded Mounting Hole Diameter
0.138 inches nominal
المركز المعني بالفصل بين مرافق النقل الموازية إلى مرتفع
0.500 inches nominal
طراز Actuator Style
round
مقياس المحرك
0.250 inches nominal
المصوّر
0.330 inches nominal
حريص الموقع
0.375 inches maximum
الحد الأقصى للفولط
115.0 ac and 28.0 dc
تحديد العنصر النهائي
training device 49956
نوع الإغلاق
fully inclosed
Mounting Method
unthreaded hole
ترتيب الاتصال غير المستعمل
1 pole, double throw, one position momentary single switch unit
قوة الإفراج
15.0 ounces maximum
قوة الفرز
20.0 ounces nominal
حركة المحاضرين
0.203 pretravel inches minimum and 0.250 overtravel inches maximum and 0.100 differential inches minimum
Contact Load Current Rating at Maximum Rated Voltage
10.000 amperes resistive dc and 6.000 amperes inductive dc and 10.000 amperes motor ac
النوع والكم
3 screw

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A053A0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0000399
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8536509050

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061360
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34430
National Motor Freight Class Rating
M - 85.0
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
coils/yokes focus/deflection tv

الأسئلة الشائعة

احصل على رؤى حول إجراءات التثبيت وظروف التشغيل وتعليمات الرعاية ولوائح الصناعة والمشكلات الشائعة. توفر الأسئلة الشائعة أدناه معلومات أساسية عن C2-71

What is the FSCG of the NSN 5930-01-050-8433?
The FSCG of the NSN 5930-01-050-8433 is 5930
Does the NSN 5930-01-050-8433 have a Schedule B code assigned?
Yes, the Schedule B code is 8536509050
Does NSN 5930-01-050-8433 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5930-01-050-8433 contain precious materials?
Precious metal content is unknown
Does NSN 5930-01-050-8433 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5930-01-050-8433 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Tue, Nov 15, 1977

هل تحتاج إلى مواد استهلاكية؟

هل تنفد الإمدادات الأساسية؟ استكشف كتالوجنا الشامل للمواد الاستهلاكية عالية الجودة المصممة للحفاظ على عملياتك على المسار الصحيح.

Electrical Wires

موصى به لك

اكتشف مجموعة مختارة من مكونات NSN الأخرى عالية الطلب من الكتالوج الخاص بنا. يتم الحصول على هذه الأجزاء المميزة بشكل متكرر من قبل فرق المشتريات عبر قطاعات الدفاع والفضاء والصناعة.

السعر والتوافر

املأ النموذج للحصول على تفاصيل دقيقة عن الأسعار والمهلة الزمنية والمخزون من متخصصي NSN لدينا:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

الأجزاء الشعبية

تصفح أجزائنا الأفضل أداء ، والتي تم اختيارها بناء على طلب العملاء وتكرار الشراء. تتضمن جميع البيانات أحدث المواصفات والتوافر والحالة:

13730300M02
5961-01-110-6851
Diode Semiconductor Device
1373030105
2530-01-504-2552
Air Brake Chamber
13730302
5310-00-901-3191
Flat Washer
137304
3460-01-435-1888
Abrasive Wheel
137304-01
5340-00-073-1441
Retaining Band
137304-02
5340-00-073-8380
Retaining Band
137304-03
5340-00-486-5935
Retaining Band
137304-04
5340-00-073-1443
Retaining Band
137304-05
5340-00-961-2781
Retaining Band
137304-06
5340-00-505-5394
Retaining Band
137304-07
5340-00-159-7394
Retaining Band
137304-08
5340-01-095-3886
Loop Clamp
137304-1
3120-01-449-0071
Sleeve Bushing
137304-10
3120-01-449-0088
Sleeve Bushing
137304-11
3120-01-449-0090
Sleeve Bushing