74408

Shouldered and Stepped Stud

توفر هذه الصفحة معلومات كاملة وموثقة لرقم الجزء 74408, NSN 5307-00-125-8253

ستجد المواصفات الفنية التفصيلية وسمات المنتج وتصنيف الحالة وتوافر المخزون في الوقت الفعلي. تستند جميع البيانات إلى السجلات الرسمية وتفي بمعايير الصناعة للدفاع والفضاء والمصادر الصناعية. سواء كنت تقوم بإجراء تدقيق لقطع الغيار أو التحقق من صحة الامتثال أو إعداد أمر شراء، فإن قائمة الأجزاء هذه تدعم عملية شراء دقيقة وفعالة.

74408
مجموعة الإمداد الفيدرالية
Hardware and Abrasives
تصنيف الإمدادات الفيدرالية
5307 الطلاب
رقم السهم الوطني
5307-00-125-8253
اسم العنصر الكود
15944
تاريخ التعيين
01/01/1963 (منذ 63 سنة)

A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. فكل أو جزء من القسم غير المخطط له أكبر من الحد الأقصى للجزء الأكبر من القسم الذي خُططط. قد يكون مضغاً Excludes:items with tapered threads. انظر أيضاً، مقفل.

2a stud thread thread class, 0.219 inches minimum nut thread thread length, 2a nut thread thread class, right-hand nut thread thread direction, right-hand stud thread thread direction

الخصائص

فيما يلي المواصفات الرسمية وتفاصيل الأداء لهذا الجزء ، بما في ذلك البيانات الفنية وتكوين المواد ومعلومات الامتثال.

فئة الخيط
2a nut thread
فئة الخيط
2a stud thread
اتجاه الخيط
right-hand nut thread
اتجاه الخيط
right-hand stud thread
طول الخيط
0.219 inches minimum nut thread
طول الخيط
0.188 inches minimum stud thread
كتف لينجث
0.688 inches nominal
الطول الإجمالي
1.188 inches nominal
Nut End Shank Length
0.094 inches nominal
Distance Across Flats
0.312 inches nominal
كمية الخيوط لكل بوصة
32 stud thread
كمية الخيوط لكل بوصة
40 nut thread
حجم الخيط الاسمي
0.138 inches nut thread
حجم الخيط الاسمي
0.190 inches stud thread
Nut End Shank Diameter
0.188 inches nominal
مادة
steel
معالجة السطح
nickel overall
مُحدد الأسلوب
shouldered and stepped
مُعَيِّن سلسلة الخيوط
unf nut thread
مُعَيِّن سلسلة الخيوط
unf stud thread

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Source of Supply
S9I - Defense industrial supply center philadelphia, pennsylvania 19111
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A051A0
Precious Metals Indicator
U - Precious metal content is unknown
Pseudo Item Name Code
0015944
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
093486
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
48950
National Motor Freight Class Rating
W - Rating variable
Less than Car Load Rating
U - 50.0
Water Commodity
573 - Bolts or nuts (iron or steel),(less than 35 feet)
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
BZ -
National Motor Freight Description
bolts,nuts or screws, noi (sub 3)

الأسئلة الشائعة

احصل على رؤى حول إجراءات التثبيت وظروف التشغيل وتعليمات الرعاية ولوائح الصناعة والمشكلات الشائعة. توفر الأسئلة الشائعة أدناه معلومات أساسية عن 74408

What is the FSCG of the NSN 5307-00-125-8253?
The FSCG of the NSN 5307-00-125-8253 is 5307
Does NSN 5307-00-125-8253 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5307-00-125-8253 contain precious materials?
Precious metal content is unknown
Does NSN 5307-00-125-8253 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5307-00-125-8253 was assigned to the Federal Catalog?
It was assigned منذ 63 سنة, on Tue, Jan 1, 1963

هل تحتاج إلى مواد استهلاكية؟

هل تنفد الإمدادات الأساسية؟ استكشف كتالوجنا الشامل للمواد الاستهلاكية عالية الجودة المصممة للحفاظ على عملياتك على المسار الصحيح.

Electrical Wires

موصى به لك

اكتشف مجموعة مختارة من مكونات NSN الأخرى عالية الطلب من الكتالوج الخاص بنا. يتم الحصول على هذه الأجزاء المميزة بشكل متكرر من قبل فرق المشتريات عبر قطاعات الدفاع والفضاء والصناعة.

السعر والتوافر

املأ النموذج للحصول على تفاصيل دقيقة عن الأسعار والمهلة الزمنية والمخزون من متخصصي NSN لدينا:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

الأجزاء الشعبية

تصفح أجزائنا الأفضل أداء ، والتي تم اختيارها بناء على طلب العملاء وتكرار الشراء. تتضمن جميع البيانات أحدث المواصفات والتوافر والحالة:

ST7M343T0408
4730-01-067-5230
Tube Reducer
ST7M343T0610
4730-00-596-3425
Tube Reducer
ST7M343T0616
4730-00-596-3427
Tube Reducer
ST7M343T0812
4730-01-502-8095
Tube Reducer
ST7M343T1016
4730-00-274-4667
Tube Reducer
ST7M344-1
4730-00-518-1171
Plug Assembly
ST7M347-2
4820-00-499-2585
Check Valve
ST7M347-3
4820-01-578-3750
Check Valve
ST7M348-1
5340-00-538-8659
Filler Opening Cap
ST7M349
5330-01-719-0599
Plain Seal
ST7M349-1
5330-00-352-0481
Preformed Packing
ST7M349-11
5330-01-520-9666
Preformed Packing
ST7M349-13
5330-01-718-6889
Preformed Packing
ST7M349-14
5330-01-719-0599
Plain Seal
ST7M349-15
5330-01-449-9887
Preformed Packing