SCO176F

Digital Microcircuit

توفر هذه الصفحة معلومات كاملة وموثقة لرقم الجزء SCO176F, NSN 5962-00-549-1237

ستجد المواصفات الفنية التفصيلية وسمات المنتج وتصنيف الحالة وتوافر المخزون في الوقت الفعلي. تستند جميع البيانات إلى السجلات الرسمية وتفي بمعايير الصناعة للدفاع والفضاء والمصادر الصناعية. سواء كنت تقوم بإجراء تدقيق لقطع الغيار أو التحقق من صحة الامتثال أو إعداد أمر شراء، فإن قائمة الأجزاء هذه تدعم عملية شراء دقيقة وفعالة.

SCO176F
مجموعة الإمداد الفيدرالية
Electrical and Electronic Equipment Components
تصنيف الإمدادات الفيدرالية
5962 الدوائر الإلكترونية الدقيقة
رقم السهم الوطني
5962-00-549-1237
اسم العنصر الكود
31779
تاريخ التعيين
10/15/1974 (منذ 51 سنة)

-55.0 to 125.0 celsius operating temp range, 46.0 milliwatts maximum power dissipation rating, 0.030 inches minimum and 0.085 inches maximum body height, 0.280 inches maximum body length, 0.240 inches minimum and 0.260 inches maximum body width

الخصائص

فيما يلي المواصفات الرسمية وتفاصيل الأداء لهذا الجزء ، بما في ذلك البيانات الفنية وتكوين المواد ومعلومات الامتثال.

طول الجسم
0.280 inches maximum
الجسد
0.240 inches minimum and 0.260 inches maximum
الجسم
0.030 inches minimum and 0.085 inches maximum
الحد الأقصى لتبديد السلطة
46.0 milliwatts
معبد التشغيل
-55.0 to 125.0 celsius
نطاق درجة حرارة التخزين
-65.0 to 150.0 celsius
الميزات المقدمة
hermetically sealed and monolithic and positive outputs and expandable and medium speed and medium power
مواد الإغلاق
ceramic and glass
الضبط
flat pack
الاستمارة المحلية
diode-transistor logic
دائرة المدخلات
dual 4 input
التسمية والكم
2 gate, nand-nor
المصدر والمصمم
f-1 mil-m-38510
العلاج السطحي النهائي
solder
Voltage Rating and Type الخصائص
5.5 volts maximum power source
وثيقة بيانات الاختبار
"81349-mil-m-38510 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
النوع والكم
14 flat leads
المواصفات/البيانات القياسية
81349-mil-m-38510/30 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A458A0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0031779
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8542900000

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061700
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34580
National Motor Freight Class Rating
W - Rating variable
Less than Car Load Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
elec appliances/instruments noi

الأسئلة الشائعة

احصل على رؤى حول إجراءات التثبيت وظروف التشغيل وتعليمات الرعاية ولوائح الصناعة والمشكلات الشائعة. توفر الأسئلة الشائعة أدناه معلومات أساسية عن SCO176F

What is the FSCG of the NSN 5962-00-549-1237?
The FSCG of the NSN 5962-00-549-1237 is 5962
Does the NSN 5962-00-549-1237 have a Schedule B code assigned?
Yes, the Schedule B code is 8542900000
Does NSN 5962-00-549-1237 require demilitarization?
"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Does NSN 5962-00-549-1237 contain precious materials?
Item does not contain precious metal.
Does NSN 5962-00-549-1237 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5962-00-549-1237 was assigned to the Federal Catalog?
It was assigned منذ 51 سنة, on Tue, Oct 15, 1974

هل تحتاج إلى مواد استهلاكية؟

هل تنفد الإمدادات الأساسية؟ استكشف كتالوجنا الشامل للمواد الاستهلاكية عالية الجودة المصممة للحفاظ على عملياتك على المسار الصحيح.

Electrical Wires

موصى به لك

اكتشف مجموعة مختارة من مكونات NSN الأخرى عالية الطلب من الكتالوج الخاص بنا. يتم الحصول على هذه الأجزاء المميزة بشكل متكرر من قبل فرق المشتريات عبر قطاعات الدفاع والفضاء والصناعة.

السعر والتوافر

املأ النموذج للحصول على تفاصيل دقيقة عن الأسعار والمهلة الزمنية والمخزون من متخصصي NSN لدينا:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

الأجزاء الشعبية

تصفح أجزائنا الأفضل أداء ، والتي تم اختيارها بناء على طلب العملاء وتكرار الشراء. تتضمن جميع البيانات أحدث المواصفات والتوافر والحالة:

6301E06-ITEM19
5310-01-576-8017
Square Plain Nut
6301E06-ITEM2
5340-01-621-4599
Channel Sup Weld
6301E06-ITEM21
5310-01-577-5628
Flat Washer
6301E06-ITEM22
5310-01-577-5632
Lock Washer
6301E06-ITEM23
5310-01-577-5636
Flat Washer
6301E06-ITEM24
5340-01-576-8006
Lock Block
6301E06-ITEM25
5305-01-576-8018
Hexagon Head Cap Screw
6301E06-ITEM3
3120-01-576-7844
Jack Bolt Bushing
6301E06-ITEM4
5310-01-576-7847
Square Nut Retainer
6301E06-ITEM6
5315-01-576-7853
Headless Straight Pin
6301E06-ITEM7
5306-01-576-8001
Jack Bolt
6301E06-ITEM8
5340-01-576-8007
Jack Bolt Retainer
6301E06-ITEM9
5340-01-576-8004
Channel End Cap
6301E26-ITEM11
4030-01-580-1523
Conn Chain Assembly
6301E26-ITEM13
6105-01-580-1517
Motor Assembly