Features and Characteristics
Center To Center Distance
35.000 inches
Accessory Components And Quantity
4 belts/v/; 1 bushing, spindle ctr.; 2 ctrs., tailstock, headstock, no.2 morse taper; 1 chuck, lathe, ind., med.Duty, 4 jaw, 10 in.W/wrench; 1 chuck, lathe, scroll self ctr., med.Duty, 3 jaw, univ., w/rev.Jaws, 6 in.W/wrench; 24 cutter bit, tool holder h-speed steel, unfinished, sq, 5/16by2-3/4 in.; 1 cutter bit, tool holder, unfinished, beveled, 1/8by3/4by6 in.; 3 cutter bit, tool holder, unfinished, sq, 1/4by2-1/8 in.; 1 dial, indicating, thd chasing; 1 dog set, 1 ea, bent tail, single screw 1/2, 3/4, 1, 1-1/4, 1-1/2 in.Cap; 1 holder, cutting tool, boring w/boring bar, 30, 45 and 90 degrees end caps, cutter bits and wrench, 1/2by1-1/8 in.Shank, 3/4 in.Bar dia; 1 holder, cutting off, straight shank, w/cutter bit, and wrench, 1/2by1-1/8 in.Shank; 1 ea rh, lh, straight holder, cutting tool, turning, offset, w/cutter bit and wrench, 1/2by1-1/8 in.Shank; 1 ea wrench, tailstock, tool post
Electric Motor Horsepower Rating
0.750
Electric Motor Quantity
1
Rated Swing
12.000 inches
Actual Swing Over Bed
12.500 inches
Headstock Drive Type
Geared head
Headstock Center Taper Size Designator
2 morse
Hole Diameter Through Spindle
1.313 inches
Carriage Cross Feed Operation Method
Hand and power
Carriage Feed Change Quantity
57
Voltage In Volts
115.0 and 230.0
Special Features
1 knurling tool, lathe, self-ctr., w/diamond knurls 1/2by1-1/8 in.Shank; 1 ea mandrel, expansion, sleeve, 1/2to11/16, 11/16to1, 1to1-9/32, 1-9/32to1-9/16 in-.Rnage; 1 ea, plate, adapter, chuck mtg, unfinished, 5, 5-7/8 in.Dia; 1 ea plate, face, 11, 5 in.Dia; 1 post, tool; 1 ea rest, follower, steady; 1 screw, thd depth stop/spec/; 1 stop, thd depth; 1 ea wrench, box, double head, 12 point, lg 15 degrees offset, 9/16 and 5/8, 1-1/16 and 1-1/4 in. Openings