885B054263
Gasket
This page provides complete and verified information for part number 885B054263, NSN 5330-01-061-1980
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
Federal Supply Group
Hardware and Abrasives
Federal Supply Classification
5330 Packing and Gasket Materials
National Stock Number
5330-01-061-1980
Item Name Code
04522
Assigment Date
06/14/1978 (47 years ago)
0.125 inches minimum and 0.187 inches maximum hole diameter, 0.031 inches nominal inside corner radius, solid single or composition cross-sectional shape style, 0.875 inches minimum and 0.937 inches maximum overall width, 1.281 inches minimum and 1.343 inches maximum overall length
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Cross-Sectional Shape Style
- solid single or composition
- Hole Diameter
- 0.125 inches minimum and 0.187 inches maximum
- Overall Length
- 1.281 inches minimum and 1.343 inches maximum
- Overall Width
- 0.875 inches minimum and 0.937 inches maximum
- Inside Corner Radius
- 0.031 inches nominal
- Aperture Width
- 0.500 inches minimum and 0.562 inches maximum
- Aperture Length
- 0.500 inches minimum and 0.562 inches maximum
- Center To Center Distance Between Bolt Holes Along Length
- 0.969 inches minimum and 1.031 inches maximum
- Cross-Sectional Thickness
- 0.062 inches nominal
- Hardness Rating
- 45.0 shore durometer a minimum and 55.0 shore durometer a maximum overall
- Maximum Pressure Rating
- 1000.0 pounds per square inch
- Special Features
- 0.467 in. radius along top and bottom length from center of aperture
- Material
- rubber chloroprene class cr overall
- Material Document And Classification
- mil-g-1149,ty 1 mil spec single material response overall
- Style Designator
- non-circular
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- 4 - Partial descriptive item identification (type 1 concept)
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A032A0
- U - Precious metal content is unknown
- 0004522
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- KZ
- 194120
- Z
- 95100
- W - Rating variable
- 596 - Gaskets, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- VZ -
- washers/gaskets/pckg dvcs noi
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 885B054263
What is the FSCG of the NSN 5330-01-061-1980?
The FSCG of the NSN 5330-01-061-1980 is 5330
Does NSN 5330-01-061-1980 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5330-01-061-1980 contain precious materials?
Precious metal content is unknown
Does NSN 5330-01-061-1980 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5330-01-061-1980 was assigned to the Federal Catalog?
It was assigned 47 years ago, on Wed, Jun 14, 1978
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
FREE
