P321CCT
Electrical Plug Connector
This page provides complete and verified information for part number P321CCT, NSN 5935-00-549-7759
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
Federal Supply Group
Electrical and Electronic Equipment Components
Federal Supply Classification
5935 Electrical Connectors
National Stock Number
5935-00-549-7759
Item Name Code
01938
Assigment Date
01/01/1961 (65 years ago)
0.625 inches nominal cable entrance diameter, 1.125 inches nominal overall width, 1 mating end quantity, 2.312 inches nominal body length, 2.562 inches nominal overall height
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Overall Height
- 2.562 inches nominal
- Overall Width
- 1.125 inches nominal
- Body Length
- 2.312 inches nominal
- Cable Entrance Diameter
- 0.625 inches nominal
- Mating End Quantity
- 1
- Contact Removability
- nonremovable single mating end single contact grouping
- Contact Maximum Current Rating In Amps
- 10.0 single mating end single contact grouping
- Contact Maximum Ac Voltage Rating In Volts
- 730.0 single mating end single contact grouping
- Polarization Method
- contact
- Shell Type
- hood, top opening
- Connector Cable Strain Relief Method
- cable clamp
- Terminal Location
- back single mating end single contact grouping
- Contact Material
- copper alloy single mating end single contact grouping
- Contact Surface Treatment
- cadmium single mating end single contact grouping
- Insert Material
- plastic polyester single mating end
- Terminal Type
- tab, solder lug single mating end single contact grouping
- Shell Material
- steel
- Shell Surface Treatment
- paint
- Included Contact Quantity
- 21 single mating end single contact grouping
- Included Contact Type
- flat pin single mating end single contact grouping
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 4 - Partial descriptive item identification (type 1 concept)
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A039B0
- U - Precious metal content is unknown
- 0001938
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8536695050
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- XX
- 061680
- Z
- 34570
- W - Rating variable
- 658 - Electrical appliances, small
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- elec wiring plugs etc
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for P321CCT
What is the FSCG of the NSN 5935-00-549-7759?
The FSCG of the NSN 5935-00-549-7759 is 5935
Does the NSN 5935-00-549-7759 have a Schedule B code assigned?
Yes, the Schedule B code is 8536695050
Does NSN 5935-00-549-7759 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5935-00-549-7759 contain precious materials?
Precious metal content is unknown
Does NSN 5935-00-549-7759 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5935-00-549-7759 was assigned to the Federal Catalog?
It was assigned 65 years ago, on Sun, Jan 1, 1961
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
FREE
