C7960-2F
Flush Catch
This page provides complete and verified information for part number C7960-2F, NSN 5340-01-547-6164
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
An indicator unit on which computer information is visually displayed. Indication of data may be achieved by cathode ray tubes, plasma display, light emitting diodes, crystal display or the like. For items which also include an input section such as a keyboard, cursor, or rolling ball, see terminal, data processing.
1.062 inches minimum and 1.067 inches maximum center to center distance between mounting holes along length, f-22 raptor end item identification, 0.125 inches nominal mounting hole diameter, 1.062 inches minimum and 1.067 inches maximum center to center distance between mounting holes along width, catch, clamping part name assigned by controlling agency
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Mounting Hole Diameter
- 0.125 inches nominal
- Center To Center Distance Between Mounting Holes Along Width
- 1.062 inches minimum and 1.067 inches maximum
- Center To Center Distance Between Mounting Holes Along Length
- 1.062 inches minimum and 1.067 inches maximum
- End Item Identification
- f-22 raptor
- Part Name Assigned By Controlling Agency
- catch, clamping
- Lever Offset Distance
- 0.100 inches nominal
- Bolt Offset Distance
- 0.240 inches nominal
- Special Features
- buttons-material 2024-t3, 2024-t351, 2024-t4 per qq-a-250/4 or qq-a-225/6, finish anodize per mil-a-8625 typeii, gasket-material synthetic rubber per ams 3240 (40 shore)
- Material
- steel comp 630 or steel comp 301 or steel comp 302 or steel comp 304 or steel comp 316 mounting bracket
- Material
- steel comp 631 spring
- Material Document And Classification
- ams5673 assn std single material response spring
- Material Document And Classification
- mil-s-5059 mil spec 1st material response or mil-s-25043 mil spec 1st material response or ams5673 assn std 2nd material response mounting bracket
- Surface Treatment
- passivate mounting bracket
- Surface Treatment
- passivate spring
- Surface Treatment Document And Classification
- qq-p-35 fed spec single treatment response mounting bracket
- Surface Treatment Document And Classification
- qq-p-35 fed spec single treatment response spring
- Style Designator
- button actuator
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Automatic Data Processing Point
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 4 - Partial descriptive item identification (type 1 concept)
- 0 - Represents items with no adp components
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A10600
- A - Item does not contain precious metal.
- 0020262
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8302497500
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TK
- 094100
- Z
- 00000
- W - Rating variable
- 713 - Metal hardware
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- AZ -
- clamps,clips,fastners latches sub3
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for C7960-2F
What is the FSCG of the NSN 5340-01-547-6164?
Does the NSN 5340-01-547-6164 have a Schedule B code assigned?
Does NSN 5340-01-547-6164 require demilitarization?
Does NSN 5340-01-547-6164 contain precious materials?
Does NSN 5340-01-547-6164 contain hazardous materials?
When the NSN 5340-01-547-6164 was assigned to the Federal Catalog?
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
